The simplest installation method for a motorized artwork frame is by using our straps installation method to slip the motorized art subframe over the front of the TV then secure the frame onto the TV using two straps which extend vertically from the top of the TV to the bottom. This method can used for surface mounted TV's or fully recessed TV's using an articulating swing arm.
What to do before the frame arrives:
- TV: Use an ultra thin television (less than 2" thick)
- TV MOUNTING METHOD:
- RECESSED: Make a roughed in recess in the wall with a 2x4 stud on all four sides of the recess. Contact us to determine the opening size of the recess.
- SURFACE MOUNTED: Install the TV as normal on a wall ensuring that the mount is secured into studs.
- ELECTRICAL: install a standard 2 receptacle outlet behind the TV
NOTE: This method is not recommended for TV's greater than 50" diagonal screen size. Installation using this method on screen sizes larger than this can result in serious injury or death.
WARNING: If you have any questions or concerns about the installation process of any of our products, DO NOT PROCEED! Contact 978-912-7200 before proceeding. Failure to properly install this system may result in serious injury or death.
Be sure to also review the information provided by your TV manufacturer and the supplier of the TV's wall mount to ensure the weight ratings and limitations of any devices directly associated by the installation of this product.
The following animation shows an overview of the majority of the installation process.
For information on how to install the infrared relay system (IR-1E or IR-2) on the TV prior to installing the frame visit the following: